Wabi Special Frameset, Imperfects
Our lugged frame features a timeless aesthetic that can go more retro or modern depending on how you design it. This limited selection of framesets are 'Imperfects,' meaning they have very minor tubing or paint imperfections from the factory and are being sold at a discount of 10%. These can also be built into a full build with the same frame $ discount applied to the whole build. We recommend buying the frame and then contacting us about a quote on the full build.
|RIDER HEIGHT||FRAME SIZE||STANDOVER HEIGHT|
|5'4 - 5'7||49CM||30.2IN|
|5'7 - 5'10||52CM||31.3IN|
|5'10 - 6'1||55CM||32.5IN|
|6'1 - 6'3||58CM||33.6IN|
|6'3 - 6'6||60CM||34.8IN|
Imperfections are typically have 1-2 very small indentations (smaller than a pea and about 1mm deep) in the top tube, seat tube or down tube and/or a minor paint issue (swirling, thickening). These issues would be hard to find if not pointed out (and very difficult to photograph), but are marked as 'Imperfects'. They do not impact the performance or warranty of the frames and, as noted, are not noticeable to the casual observer. S
Frame: Hand-built using seamless heat treated, double butted oversized Reynolds 725 chromoly steel main tubes with forged track style rear drops. Braze ons for two bottle cages, on the down tube and seat tube. Beautiful hand brazed lugged construction.
Fork: Hand brazed tapered chromoly steel with investment cast crown, 1 1/8" steerer and forged fork ends. Tange Seiki Technoglide headset with cartridge type bearings.
The colors are Glacier Green, a metallic green, and Basalt Gray, a dark pearlized blue-gray. I
We also have a custom color, RAL-1023 yellow that has some very small graininess at some spots on the frame.
Please specify silver or black headset in comments at checkout. Special frames ship with silver headsets by default.
- Includes: Frame, fork, headset, and seat post clamp
- Weight: 5.9 lbs (55cm)
- Accepts 68mm English standard bottom brackets.
- Threadless 1-1/8" steerer tube
- 100m front dropout spacing; 120mm rear dropout spacing
- 27.2mm seatpost compatible
- Note: No fork, dropout or stay eyelets or chain stay bridge.
We cannot guarantee the fit of any specific component set other than the ones we sell with our complete bikes. If you are planning a specific build please contact us to see if we are aware of any issues. Even so, we will be unable to offer refunds based on lack of fit with any third-party components.