Description
Our most popular frameset features Reynolds 725 steel and seamless TIG weld.
The current colors are:
- Cosmic Red: a metallic red.
- Midnight Blue: a dark blue.
- Alpine Gray: a light gray.
- Custom colors are available as an option. See our FAQ for the process.
Classic frames, as of Spring 2023, also have been updated with new chainstay design for better clearance with narrow cranksets and provide more stiffness in the rear triangle.
The frame is hand-built using seamless heat treated, double butted oversized Reynolds 725 chromoly steel main tubes with forged track style rear drops. There are braze ons for two bottle cages, on the down tube and seat tube.
The fork is brazed tapered chromoly steel with investment cast crown, 1 1/8" steerer and forged fork ends. It includes a Tange Seiki Technoglide headset with cartridge type bearings. Choose your headset color from the dropdown menu.
Chainstay are indented on the inside to provide optimal tire clearance and indented on the outside of the drive side to provide better crankarm/chainring clearance.
Tech Specs
- Includes: Frame, fork, headset, and seat post clamp
- Weight: 5.8 lbs (55cm)
- Accepts 68mm English standard bottom brackets.
- Threadless 1-1/8" steerer tube
- 100m front dropout spacing; 120mm rear dropout spacing
- 27.2mm seatpost compatible
- Accommodates almost all track cranksets (tested to 135mm Q factor).
- Eyelets at inside of front fork and inset at rear dropouts. May require fender/rack modifications and/or spacers to fit properly.
- Bottom bracket is not included.
SIZING
We highly recommend reviewing our sizing page before purchasing. Look at both your height and your actual inseam / standover height. The guide below can also provide some general guidelines.
| RIDER HEIGHT | FRAME SIZE | STANDOVER HEIGHT |
| 5'4 - 5'7 | 49CM | 30.2IN |
| 5'7 - 5'10 | 52CM | 31.3IN |
| 5'10 - 6'1 | 55CM | 32.5IN |
| 6'1 - 6'3 | 58CM | 33.6IN |
| 6'3 - 6'6 | 60CM | 34.8IN |
Frame size is measured center-to-center of the seat tube. See more on our sizing page.
COMPONENT SIZING
Note that our frames are designed around a 170mm crank arm length, a 24mm setback seatpost and varying stem lengths (based on frame size and height). You can find our stem length recommendations under the 'DETERMINING BIKE COMPONENTS FIT' section on the sizing page. If you choose different components, it may impact the fit.
IMPORTANT NOTE ON COMPATIBILITY
We cannot guarantee the fit of any specific component set other than the ones we sell with our complete bikes. If you are planning a specific build please contact us to see if we are aware of any issues. Even so, we will be unable to offer refunds based on lack of fit with any third-party components.