DESCRIPTION
More Specials will arrive in early March, featuring two new colors: Oxide Red, a dark-gloss red, and Heritage Blue, a classic light metallic blue. See here for color swatches. The other colors will not be restocked, but will remain available until we sell out of those sizes.
Our lugged frame features a timeless aesthetic that can lean more retro or more modern, depending on how you design it.
The frame is hand-built from seamless, heat-treated, double-butted Reynolds 725 chromoly steel main tubes and forged track-style rear drops. There are braze-ons for two bottle cages on the down and seat tubes. It also features beautiful hand-brazed lugged construction.
The fork features hand-brazed tapered chromoly steel with an investment cast crown, 1 1/8" steerer, and forged fork ends. It includes a Tange Seiki Technoglide headset with cartridge-type bearings. Choose your headset color from the dropdown menu.
The current colors are Iron Wine, a metallic plum, and Platinum White, a pearlized white. There is limited stock on past colors, such as Sapphire Blue, a metallic blue, and Titanium Gray, a titanium-hued silver. Custom colors are also an option. See more info here.
Tech Specs
- Includes: Frame, fork, headset, and seat post clamp
- Weight: 5.9 lbs (55cm)
- Accepts 68mm English standard bottom brackets.
- Threadless 1-1/8" steerer tube
- 100m front dropout spacing; 120mm rear dropout spacing
- 27.2mm seatpost compatible
- Accommodates almost all track cranksets (tested to 135mm Q factor).
- Note: No eyelets,braze-ons, or attachment points on fork, dropouts, or seat/chain stays for fenders or racks.
SIZING
We highly recommend reviewing our sizing page before purchasing. Look at both your height and your actual inseam / standover height. The guide below can also provide some general guidelines.
| RIDER HEIGHT | FRAME SIZE | STANDOVER HEIGHT |
| 5'4 - 5'7 | 49CM | 30.2IN |
| 5'7 - 5'10 | 52CM | 31.3IN |
| 5'10 - 6'1 | 55CM | 32.5IN |
| 6'1 - 6'3 | 58CM | 33.6IN |
| 6'3 - 6'6 | 60CM | 34.8IN |
Frame size is measured center-to-center of the seat tube. See more on our sizing page.
COMPONENT SIZING
Note that our frames are designed around a 170mm crank arm length, a 24mm setback seatpost and varying stem lengths (based on frame size and height). You can find our stem length recommendations under the 'DETERMINING BIKE COMPONENTS FIT' section on the sizing page. If you choose different components, it may impact the fit.
IMPORTANT NOTE ON COMPATIBILITY
We cannot guarantee the fit of any specific component set other than the ones we sell with our complete bikes. If you are planning a specific build please contact us to see if we are aware of any issues. Even so, we will be unable to offer refunds based on lack of fit with any third-party components.