Wabi Retrofit Head Tube Badge

This is a version of our new head tube badge with our new logo intended for Wabi models with our previous decal. This is an all-silver version that is slightly wider to fully cover the old logo. 

This is die-cast metal with high-strength tape on the back. It only comes in silver.

Notes

For optional installation, follow these steps:

1. Thoroughly clean the front of your head tube. Use rubbing alcohol to remove any grease or dirt.
2. Using a measuring tape and a piece of masking tape, mark the top of where the badge will be placed. The badge is 60mm high, so find the center of the head tube and add 30mm to find the top.
3. Before removing the adhesive from the back of the badge, gently squeeze the edges to slightly reduce its diameter. This will help ensure a better fit.
4. Peel off the adhesive tape cover, then line up the badge on the head tube. Use the tape to mark the top and use the edges of the old logo for the sides. The badge is just slightly larger than the edges of that old logo, so it needs to be placed well. We recommend a trial placement before you remove the tape cover if you are having a hard time centering it. Once you stick it on, it can be relocated.